Display three bikes without taking a lot of space in your shop with this three-tiered stand. It is heavy-duty to allow for heavy downhill or e-bikes. The bikes are held by the tires only, and the tire holders are adjustable to fit any wheel size. It is easy to place and remove bikes from the size, even with other bikes in place.

• Holds three bikes on different levels
• Bikes are held by front tire with rear tire support; adjustable holder fits any tire size
• Super durable frame construction to allow for heavy eBikes
• Holds upright and stable without touching any part of the bike frame
• Bikes are easy to place and remove from any position from the side

Display three bikes at (and above!) eye level without taking a lot of space in your shop or garage with this three-tiered stand. The bikes are held by both the tires and a bottom bracket support, which is height-adjustable. This can be combined with 423-1700-00 (Minoura 971-3) to display six bikes. Compatible with most bikes.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• Bottom bracket support is fully height-adjustable
• Some types of bike frame are not compatible due to bottom bracket shell design
• Combine with 423-1700-00 (Minoura 971-3) to display six bikes

Display four bikes on this stand without taking a lot of space in your shop or garage with this four-tiered stand. The bikes are held by both the tires and a bottom bracket support, which is height-adjustable. Compatible with most bikes.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• Bottom bracket support is fully height-adjustable
• Some types of bike frame are not compatible due to bottom bracket shell design
• Easy to assemble

This stand can display three bikes by holding them up by their front wheels. The holders fold in and out to accommodate different wheel sizes. The height of the bar will adjust from 29 - 31.5 inches.

• Holds three bikes by their front wheels
• Holders fold in and out to accommodate different wheel sizes
• Bar height is adjustable between 29-31.5"
• Black in color to blend in with your shop or garage
• Easy to assemble

The BikeTower20D is a very convenient and easy way to store or display bicycles. It can be installed in any room where the ceiling height is between 2.1 and 2.7 meters high. BikeTower comes with two bike cradles (more cradles can be purchased for a maximum of 4 cradles per stand.) The pillar is supported by the internal spring applying pressure to the ceiling.

• Spring loaded telescopic length multi-level double bike storage & display stand
• Height = 80 mm x Width = 1,260 mm x depth : 107mm. Adjust the height between 2.1 m to 2.7 m
• Soft pad protects the bike's finish
• Pillar is supported by the internal spring applying pressure to the ceiling.
• Additional cradles available for purchase

At the track, home, shop or races, the Level-170H is an easy-to-use steel bike storage stand. Hook the saddle nose onto the bar and the bikes are secure. Holds up to 5 bikes.

• Easy-to-use steel bike storage stand
• Saddle nose hooks onto the bar
• Holds up to 5 bikes
• No tools required for assembling/disassembling
• 5.6 feet wide, 3.7 feet tall, 24 lbs

Display three bikes without taking a lot of space in your shop or garage with this three-tiered stand. The bikes are held by both the tires and a bottom bracket support, which is height-adjustable. Compatible with most bikes.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• Bottom bracket support is fully height-adjustable
• Some types of bike frame are not compatible due to bottom bracket shell design
• Easy to assemble

The Minoura P-600AL-5S Closet-Cyclist Bicycle Storage Stand can be set up anywhere to hold one or two bikes vertically creating a maximum saving of space, and the choice between a K-shaped or X-shaped leg configuration can create even more space savings.

• Can be set up anywhere to hold one or two bikes vertically creating a maximum saving of space
• Hooks can be adjusted the entire height of the lightweight alloy pillar
• K-shaped leg allows closer spacing to wall, while x-shaped leg provides a wider, more stable base.
• Reinforced base greatly increases stability
• Weight of 13 pounds allows for easy movement

The Bike Tower 20 is a free-standing storage pole that is adjustable to many ceiling heights.  It can easily hold two bikes (or more with the purchase of more cradles). The pole locks in place after installation through a special design (it was designed in Japan to withstand earthquakes.) The rubber ends will help protect your floor and ceiling.

• Adjustable from 1.7-3.1 m (5.6-10.2 ft)
• Distance between hooks can be adjusted between 325-415 mm (12.8-16.3 in)
• Angle adjustable up to 10 degrees either way
• Padded hooks to protect your bike frame
• Double lock system and can hold up to 4 bikes with additional cradle

This bike storage stand from Minoura saves valuable space while allowing your bike to be readily accessible. You can store your bike vertical or horizontal. The top hook is padded to avoid scrates. The cradle and hook is fully adjustable to fit your bike just right. This stand fits tires from 26-29 inches with a maximum width of 2.3 inches.

• Stores bikes in 2 different orientations; Vertical or Horizontal
• Tire cradle and top hook are fully adjustable for a variety of wheels and tires. 26-29 inch with a max width of 2.3 inches.
• Top hook is padded to avoid scratches
• Vertical orientation is great for longer storage and saves valuable space
• Horizontal orientation is good for easy grab-and-go

The Minoura P-500AL-5S Bicycle Storage Stand can be set up anywhere to hold up to four bikes.  Each cradle can hold up to 55 lbs., can be angled up to 35 degrees, and can be adjusted the entire height of the lightweight alloy pillar. 

The legs can be converted between K-shaped for 2 bikes and X-shaped for 4 bikes to save space.  An included height adjuster will allow for installation in a room with a sloping floor.

• Can be set up anywhere to hold up to four bikes
• Cradles can be adjusted the entire height of the lightweight alloy pillar
• Cradles can be angled up to 35 degrees up or down, and each cradle will hold up to 55 lbs.
• Height adjuster allows for sloping floor
• K-shaped (2 bikes) or X-shaped legs (4 bikes) can be used to save space in room