Display three bikes without taking a lot of space in your shop with this three-tiered stand. It is heavy-duty to allow for heavy downhill or e-bikes. The bikes are held by the tires only, and the tire holders are adjustable to fit any wheel size. It is easy to place and remove bikes from the size, even with other bikes in place.

• Holds three bikes on different levels
• Bikes are held by front tire with rear tire support; adjustable holder fits any tire size
• Super durable frame construction to allow for heavy eBikes
• Holds upright and stable without touching any part of the bike frame
• Bikes are easy to place and remove from any position from the side

Tall height Stair type bike display stand with Crank shaft insert U-shape Bracket support, for 3 bikes.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• Some types of bike frame are not compatible due to bottom bracket shell design

Display three bikes at (and above!) eye level without taking a lot of space in your shop or garage with this three-tiered stand. The bikes are held by both the tires and a bottom bracket support, which is height-adjustable. This can be combined with 423-1700-00 (Minoura 971-3) to display six bikes. Compatible with most bikes.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• Bottom bracket support is fully height-adjustable
• Some types of bike frame are not compatible due to bottom bracket shell design
• Combine with 423-1700-00 (Minoura 971-3) to display six bikes

The 971-3U display Stand supports bike at both tires and bottom bracket shell. Tire holder position is adjustable to fit various wheelbase sizes. BB support is fully height adjustable. Some types of bike frames are not compatible due to BB shell design. This product is manufactured in Japan.

• Supports bike at both tires and bottom bracket shell
• Tire holder position is adjustable to fit various wheelbase sizes
• BB support is fully height adjustable

The BikeTower20D is a very convenient and easy way to store or display bicycles. It can be installed in any room where the ceiling height is between 2.1 and 2.7 meters high. BikeTower comes with two bike cradles (more cradles can be purchased for a maximum of 4 cradles per stand.) The pillar is supported by the internal spring applying pressure to the ceiling.

• Spring loaded telescopic length multi-level double bike storage & display stand
• Height = 80 mm x Width = 1,260 mm x depth : 107mm. Adjust the height between 2.1 m to 2.7 m
• Soft pad protects the bike's finish
• Pillar is supported by the internal spring applying pressure to the ceiling.
• Additional cradles available for purchase

Equipped with a cradle for two bicycles as standard equipment. The simple design of the cradle makes it easy to adjust the height and angle. The 7S model uses split-type columns that are easy to handle during assembly and installation, making it a breeze for anyone to handle or move and assemble in tight spaces.

•Holds two (up to four with optional accessories) bikes and can be set up in a room, house or shop
•The main pillar is made of light weight and durable two piece alloy tubing
•Mini-velo or kids bike also available
•Max cap. 25 kg
•X leg configuration for 4 bikes, K leg configuration for 2

This lightweight aluminmus stand is perfect for both the garage or to tote to the races. Holds up to 4 bikes and even comes with a nice carrying case. Can be snapped together in less that 3 minutes.

• Made of lightweight Aluminum
• Holds up to 4 bikes
• Comes with carrying case
• Maximum load of 90 lbs

Perfect for the garage, house or apartment. Stores bicycle in both vertical and horizontal positions.

• Stores bike in 2 different orientations vertically and horizontally
• Vertical orientation is great for longer storage and saves valuable space
• Horizontal orientation is good for grab-and-go for frequent riders
• Tire cradle and top hook are fully adjustable for a variety of wheels and tires
• Top hook is padded to avoid scratches

This cradle can be used with your Minoura stand or any pole that is of a 45mm diameter or less. May need padded inlay to ensure a tight fit.

• Holds a bike at top-tube
• Padded hook supports frame gently
• Each arm is angle adjustable in +/- 10 degrees to level the bike
• Alloy clamp fits 40 mm / 45 mm diameter tubing

Display and maintenance rack that holds the bike by the chainstay and seatstays Two contacts points prevent rocking and create a stable platform to hold the bike Urethane coated hooks won t harm paint and are fully adjustable both in angle and height Folding design folds flat for easy storage Silver DS-540CSMinoura DS-540CS
• Made of Aluminum
• Adjustable height and angle
• Urethane covering as to not scratch

The SPN-20 holds your bike off the ground by the crankarm. It has three different heights, and is angle-adjustable to accommodate different bike sizes. Also convenient for light maintenance.

• Holds bike off the ground by the crankarm
• Will accommodate bikes of all sizes
• Can be used to wash your bike, or light maintenance
• Angle is adjusted by a convenient knob
• Folds easily for storage or transportation